Chapter 0: Parts and Tools

Parts

In addition to the included parts of the kit, the User will be required to obtain:

• 1 Micro SD Card
• 1 Micro Type B USB cable
• 1 Tape Measure
• 1 Jig

The Jig can be obtained from our documentation repository at our GitHub Organization.

Tools

The User will need the following tools prior to proceeding:

• Soldering Iron
• Lead Based Solder
• Reflow Oven
• Low Temperature Lead Based Solder Paste
• T6 Torx Head Screwdriver
• T8 Torx Head Screwdriver
• Philips Head Screwdriver
• Flush Cutters
• Sandpaper or Dremel
• M3 Hole punch
• Hammer
• Needle Nose Tweezers
• Loctite
• Space Rated Glue
• Multimeter
• Power Supply
• Proper Protective Equipment